GLIT ProMesh® Rectangle Swimming Pool Safety Cover w/ 1' Offset Right Step - Choose Color & Size. All our mesh safety covers include the highest quality material for years of use. The mesh safety cover allows rain water and snow melt to drain through into your swimming pool leaving the cover debris and clean.
All our safety covers are ASTM rated and put through a stringent quality control inspection. All our covers include concrete brass anchors, stainless steel springs, covers for springs, installation tool, and storage bag. In order to install this cover you will need at least 3' ft of concrete.
If you have pavers or wood deck you will need special hardware. Will NOT fit pools with 4' round radius corners.Choose between green, blue, tan or gray. Step Location: while standing in the center of the deep end looking towards the shallow end, the step is located on the right hand side and it is 1' offset from the edge. All covers include concrete brass anchors, stainless steel springs, covers for springs, buckles, and installation tool. Our mesh safety covers feature fabric coating which provides superior seam strength, high tear and puncture resistance.
Construction of mesh with a unique weave of polypropylene material that blocks out algae-producing UV rays and resulting in making springtime pool opening a snap! Made from a unique weave of polypropylene mesh that blocks out algae producing UV rays, making spring time opening a snap! Tight mesh construction allows water to drain from the surface - filtering out dirt, leaves and debris! Super strong for greater tear resistance and winter wearability.
Excellent for commercial or residential use. Nearly 50% lighter than solid covers for easier installation, removal and storage.Meets or exceeds safety cover performance standards as set forth in ASTM F 1346-91. 6,886,187 - 98% Shade. Include pull-tight commercial grade springs. Two-ply mesh material that resists rot, mildew and sunlight damage. Mesh safety cover allows the water to drain back into the pool.
White thread (triple stitching) cross tack and box at all perimeter stress points. Straps run on both top and bottom of the cover for added strength and durability. You will need at least 3' of concrete to install safety cover.
Raised rub strip to prevent chafing on coping. Tight mesh, giving maximum strength. Note: if you are replacing an existing safety cover please keep in mind not all safety covers are made the same so the cover will not MATCH your existing anchors. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Covers & Reels".
The seller is "savemoreonpoolsupplies" and is located in this country: US. This item can be shipped to United States.