GLI HyperLite Rectangle Swimming Pool Solid w/ Drain Panel Safety Winter Cover w/ 4' x 8' Center End Step & 4' Radius Corner. GLI HyperLite Solid w/ Drain Panel Rectangle Safety Cover w/ Center End Step & 4' ft Radius Corners - weighs half as much as vinyl safety covers and is twice as strong.This lightweight solid safety cover will never warp or dry out and crack like vinyl safety covers. The material used to construct this cover blocks 100% of sunlight and will never fade or stain. Keeping sunlight out of your pool will yield a clean pool when it is time to open your pool in the spring.
The HyperLite Solid Safety Cover by GLI is constructed to both look great in your backyard and keep intruders out of your pool. The solid material is secured with maximum strength straps, triple stitched for the highest performance and including a high-grade rub strip to prevent wear and tear. All GLI safety covers are ASTM rated and put through a stringent quality control inspection. All our covers include concrete brass anchors, stainless steel springs, covers for springs, installation tool, and storage bag. In order to install this cover you will need at least 3' ft of concrete.Note: cover WILL fit pools with 4' radius corners. If you have pavers or wood deck you will need special hardware. Note: choose pool size and color by using the drop down window above. Improved strength and puncture resistance - the ultimate in strength able to withstand puncturing from falling tree branches, deer hooves & stray animals. Cover will have 2' ft of overlap around cover.
(Example: 16' x 32' pool size is 18' x 34' cover size). 100% Sunlight Blockage - NO spring time algae growth. PVC coated polyester fabric is 30% lighter than standard solid covers. Straps run on both top and bottom of the cover for added strength and durability.Comes with the patented Kleen-Screen drain that drains the water from the surface while filtering out dirt, leaves and debris. You will need at least 3' of concrete to install safety cover. All covers include concrete brass anchors, stainless steel springs, covers for springs, buckles, and installation tool. Note: if you are replacing an existing safety cover please keep in mind not all safety covers are made the same so the cover will not MATCH your existing anchors. The item "GLI HyperLite Rectangle Swimming Pool Safety Cover with Step & 4' Radius Corner" is in sale since Tuesday, September 19, 2017. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Covers & Reels".
The seller is "savemoreonpoolsupplies" and is located in Tonawanda, New York. This item can be shipped to United States.